 |
General Steel Buildings - Standard Features |
|
|
Steel Building Sheeting
80,000 p.s.i. yield material is standard on General Steel buildings. Some manufacturers use a lower yield strength material, which is less resistant to damage from hail and other impacts.
All Coil Steel with Galvalume coating standard (1.25oz - hot dipped) on each side helps prevent deterioration of the steel sheeting.
Deeper High-Rib with more frequent corrugations, provides extra strength.
Purlin Bearing Rib provides better weather tight seal between the roof sheets.
Optimal Semi-Concealed Panel"Shadow Line" configuration is available for walls, mansard systems, soffit material, etc..., to add an aesthetic appeal to your General Steel building. |
|
| |
|
Steel Building Fasteners
Structural Bolts meet requirements of ASTM Standards.
- A-325 for primary frame connections. A-307 for secondary framing
Self-Drilling and Self-Tapping Fasteners are pre-assembled with neoprene washers and metal caps to help insure weather tightness of your steel building. |
|
|
|
|
|
Closures
Closed Cell Neoprene Strips or plugs with self-adhesive backing are used to help seal all General Steel buildings.
- Located at rake and roof line of building to help provide weather tightness.
- Optional eave and base closures may be added.
- Pre-formed shapes to match panel configuration providing a tighter seal.
|
|
|
|
|
|
Sealants
Sealant for roof side laps, end laps and flashing gable is provided to help insure weather tightness.
- Nominal 3/8" x 1/8" thick pressure sensitive tape sealant for ease of installation.
|
|
