 |
General Steel Buildings - Standard Features |
|
|
Steel Building Ridge Cap
Preformed High-Rib Ridge Cap Panel matches the slope and profile of adjoining roof panels to help insure constant alignment and weather tightness of all General Steel buildings.
Long Overlap is provided to help prevent water from siphoning into the building. |
|
| |
|
Trim and Flashing
Trimming at rake (gable) corners and eaves is provided for all General Steel buildings with standard trim material for a finished look. This is also an additional deterrent to moisture, insects, and dirt getting into the building. |
|
|
|
|
|
Plans and Drawings
Anchor Bolt Setting Plan, building reactions for foundation design and Engineer Letter of Certification are provided shortly after receipt of deposit on building.
General Building Manual and erection drawing provide step-by-step instructions for assembly of all General Steel buildings.
Engineer Certified Erection Drawings, including wall and roof framing diagrams, cross sections, sheeting and flashing details are provided. These drawing show clearly the proper erection and assembly of all building components.
Part Numbers are Placed On Each Component (other than screws). These part numbers coincide with a detailed listing contained in the construction drawings and shipping list to help with assembly of the building. |
|
|
|
|
|
Sealants
Sealant for roof side laps, end laps and flashing gable is provided to help insure weather tightness.
- Nominal 3/8" x 1/8" thick pressure sensitive tape sealant for ease of installation.
|
|
|
|
|
|
|
Special Notes |
| |
| |
- Anchor Bolts, Foundation Designs and Erection are provided by others.
- For purposes of quoting, the weights listed for each Live Load can be used for other Building Codes used in the United States, (i.e. BOCA, SBC, UBC etc..)
- If you have any questions about whether our steel buildings can be utilized for your customer's specific code requirements, or if any adjustments are necessary, please contact General Steel Customer Service.
|
| |
|
|
